1. Cleaning work

　　Sewage tank and clean water tank

　　After use, the sewage tank should be emptied promptly and thoroughly rinsed with running water to prevent unpleasant odors and blockages in the water pipes caused by the accumulation of stains and debris.

　　The clean water tank should also be emptied regularly, especially when the floor scrubber is not used frequently, to prevent stagnant water from deteriorating and becoming a breeding ground for bacteria.

　　Water suction scraper and filter screen

　　After prolonged use, the water suction squeegee will accumulate stains and dust, affecting its water suction efficiency. Therefore, it should be inspected and cleaned after each use, especially the rubber strip and suction inlet parts.

　　The filter screen needs to be inspected and cleaned regularly to prevent impurities from blocking it and ensure normal water flow.

　　Scrubbing disc and water-absorbing rubber strip

　　The brush disc and suction rubber strip are the parts of the floor scrubber that come into direct contact with the ground and will gradually wear out. Regular inspections should be conducted to check for wear and tear, and timely replacement should be carried out.

　　II. Maintenance and Storage of the Machine Body

　　Machine body cleaning

　　After completing each task, wipe down the scrubber's body with a dry cloth to keep it clean.

　　Storage environment

　　The floor scrubber should be stored in a shady, dry, and well-ventilated place, avoiding direct sunlight and humid environments, to prevent the machine casing from aging and discoloring, as well as circuit short-circuiting and other malfunctions.

　　III. Inspection of electrical components

　　Power cord and plug

　　Regularly check whether the power cord is intact and the plug is secure, to avoid equipment malfunction or safety accidents caused by damage or looseness.

　　battery

　　Regularly check the battery level and charge it in a timely manner to avoid overcharging or over-discharging, thereby extending the battery's service life. At the same time, check whether the battery connection cables are secure to ensure normal power supply from the battery.

　　IV. Maintenance of transmission components

　　motor

　　Regularly check whether the motor is working properly. If there are any abnormal noises or overheating, the machine should be stopped immediately for inspection.

　　lubrication

　　Maintain the lubrication of the transmission part of the floor scrubber, regularly add an appropriate amount of lubricating oil, and ensure the normal lifting and lowering of the main side brush.

　　V. Other precautions

　　safe operation

　　When operating a floor scrubber, one should adhere to safety operating procedures to ensure the safety of personnel and equipment.

　　Train operators

　　Provide operators with training and guidance on the use of floor scrubbers, ensuring they are familiar with the operational procedures and precautions of the floor scrubbers.

　　Establish maintenance records

　　Establish a maintenance record for the floor scrubber, documenting each maintenance and repair carried out, to facilitate timely detection and resolution of potential issues.